NSW2010-5GT-POE-IN
Ethernet Switch(POE)
• Support IEEE802.3 at standard, compatible with IEEE802.3 af by electrical equipment (PD)
• Supports PoE Power up to 30W for each PoE port;
• Auto detect power device; will not burn non-standard PoE device or normal PoE switch;
• Supports port power supply prioritization, guarantees the continuous power supply of key nodes;
• Supports IEEE802.3 x full duplex flow control and Backpressure half duplex flow control;
• Line-speed forwarding, intelligent identification
• Supports storage – and- forwarding for Data exchange;
• Supports PoE Power up to 30W for each PoE port;
• Auto detect power device; will not burn non-standard PoE device or normal PoE switch;
• Supports port power supply prioritization, guarantees the continuous power supply of key nodes;
• Supports IEEE802.3 x full duplex flow control and Backpressure half duplex flow control;
• Line-speed forwarding, intelligent identification
• Supports storage – and- forwarding for Data exchange;
| NSW2010-5GT-POE-IN | ||||||||
| Hardware Specification | ||||||||
| Ports Type | 4×1000Mbps PoE ports (RJ45)+1×1000Mbps ports(RJ45) | |||||||
| Standards | IEEE802.3, IEEE802.3u, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at | |||||||
| Switching capacity | 10Gbps | |||||||
| Forwarding performance | 7.44Mpps | |||||||
| Packet Buffer | 1M bit | |||||||
| MAC | 2K | |||||||
| Weight | <1 kg | |||||||
| Dimensions (W×D×H) | 140mm x 76.7mm x 27.7mm (5.5"×3"×1.1") |
|||||||
| Power supply | AC: 100-240 V, 50/60 Hz | |||||||
| PoE | support POE | |||||||
| Max. PoE Power | Max capacity: 60W, Max capacity for single port: 30W |
|||||||
| Cooling Fans | 0 | |||||||
| Storage Temperature | -40 °C ~ 70 °C | |||||||
| Operating temperature | 0 °C ~ 40 °C (32 °F ~ 104 °F) | |||||||
| Operating humidity | 10%～90% (noncondensing) | |||||||
| Storage humidity | 5%～90% (noncondensing) | |||||||
| Indicator | PWR (Green), LNK/ACT (Green), PoE (Orange) | |||||||
